Serpent Spyder MT2 1/10 EP 2WD RTR

Orange

Varenr: 39855
3 299,-
-+
1 på lager
BeskrivelseSupportKundeanmeldelser
Beskrivelse
Rått børsteløst monster fra Serpent! Monstertrucken har krefter i massevis og kommer seg godt frem både on og off-road, lavt tyngdepunkt gjør den stabil og fin selv i høye hastigheter. Serpent MT2 kommer helt ferdig montert og lakkert, det eneste man trenger i tillegg er batteri og lader samt 4AA batterier til radio.



Som andre Serpent produkter fremstår også denne som robust og med høy byggekvalitet, vannbestandig elektronikk sikrer bruk året rundt.

Nødvendig tilbehør
* Batteri (2s LiPo)
* Lader
* 4stk AA batteri til radio
Spesifikasjoner

Skala 1/10
Lengde 540mm
Bredde 295mm (varierer med setup)
Høyde 190mm
Akselavstand 330mm
Motor 9T 3000Kv børsteløs
Servo 7kg med metallgir
Aksler m/ drift 1



Spyder MT2 1/10 EP 2wd 1/10 scale Monster truck in 2wd version with big Monster truck tyres/wheels and MT body. Brushless motor and waterproof 45A speedo. Metal gear servo. Dragon 2.4 GHz transmitter and supersmall receiver.

This big wheel Monster Truck can conquer any terrain with the oversized tyres. Great looks with realistic looking MT body and the large wheels / tyres. The strong and durable power system offers amazing torque and topspeed. The Spyder MT suspension comes from our competion range of vehicles and is made to last! Superior handling in both on and offroad use. The long bigbore shocks and long durable suspensions arms eats any terrain with eas. DragonRC 2.4 GHz digital transmitter included to manage all the power!

Differential
The oil filled gear-differenial is a super compact, effective and durable unit.

Clutch
The car features a solid slipper combined with a steel gear, to have a simple and durable system. The slipper clutch is optional.

Motor plate and motor guard
The motor plate comes in anodized aluminum.

Rear driveshaft system, wheel-axles
The spring steel drive shafts are thin and light, yet durable. The spring steel wheel-axles are 5mm, light and durable, guided by the 2 different size of bearings, inner 10x14x4 mm and outer 5x13x4 mm. The driveshaft pin is fully captured to prevent any failure. These bearings are for sure to stand up the rigors of any track condition.

Rear bumper
The rear bumper section is a very durable unit, easy to disassembe, and fits well with the rear of the body, to absorb the worst of back-end crashes.

Body shell
The light realistic looking MT style body, made in top quality clear polycarbonate, has a nice flowing line, steep front windscreen for down force.

Ballbearings and metric Fastners
High speed sealed stainless steel ballbearings with grease . Hard steel , mostly allen screws, roundhead and countersunk. Minimized number of different allen heads to make working on the car easier.

The kit comes complete with body and wheels, full color manual and exploded views, a blank and standard set-up sheet and Serpent decals.

Set-up possibilities
Wheelbase, Caster, Ackermann, Axle height Front, Front and rear camber, Front Toe-in and toe-out, Rear Inboard toe-in angle, Rear Outboard toe-in angle, Antisquat, Roll-centers, Ride height, Weight balance, Shocks for dampening and springs, shock angle, Gear ratios, Anti-roll bar thickness, Electronic placement

Battery space mount and weight balance
The battery is mounted perfectly in the center line of the car. Its an exact fit for saddle packs. In case of using a Shorty-pack, it can be moved to front or back to play with weight balance. Pieces of hard foam are supplied to do so and secure the battery in position. The carbon fibre battery-top-brace has a secure quick release system with handy alu twist nuts.

Wheel-axles, wheel hex, trans case, rear arms
The spring steel wheel-axles utilized 12mm hex adapter to follow current market standards. The front springs steel axle is fixed, while the rear wheel-hex is a clamping aluminum version. The composite rear transmission case is light and durable. It securely holds the motor plate, differential as well as supports the rear wing mount and rear shock tower. The long and durable angled rear suspension arms are very tough units to withstand the rigors of the track and the hard landings. The rear arm offers 2 options for shock position and two mounting locations for the rear anti-roll bar if needed.

Main features
* Ready to race
* Prepainted and precut MT body
* Dragon-RC 2.4 GHz transmitter TX-RX
* Waterproof prorammable electronic speedcontroller 45A Dragon-RC
* Brushless, sensorless motor 3000KV 9T Dragon-RC
* Durable metal gear servo Dragon-RC
* Expert factory assembly and set-up
* premounted oversized MT tyres on spoked MT wheels Dragon-RC
* Spring steel transmission
* Oil-filled gear differential and solid slipper clutch
* High performance race geometry
* Big bore 12mm RCM type shocks with dual system
* Rear motor design
* Durable composite chassis design
* Large front and rear composite bumper
Features
Chassis and Rear Chassis skid plate
Composite chassis plate with a layout allowing for a perfect weight balance, and optimal space for the electronics, battery and servo. The front kick-up angle in the chassis incorporates more clearance for racing and allow for better nose landings.The composite rear skid plate connects to the chassis plate. This connection allows you to unclip the rear end in one piece, but helps reduce the total cost of maintenance. It is also made from extremely high strength composite material.

Shocktowers and Shock absorbers
Durable composite front and rear shock towers, with multiple shock angle positions allowing to fine tune for varying conditions.Dual system 12mm big bore shocks with coated threaded bodies, a unique cap design, a superbly sealing o-ring and spacer package.

Front bumper system
The durable composite front bumper system will absorb the worst of head on crashes and will allow for save nose landings.

Front wishbones and Front and Rear Track Rods
The long front wishbones are made from a super strong composite material. The arms are angled to optimize the CG and pivot on 3mm captured pins on the inside and out. The arms have 2 mounting positions for shock angle and are prepared to use an optional anti-roll bar if needed. Spring steel front and rear track rods are mounted to durable composite captured ball joints. The track Rods have L/R threading for easy adjustments.

Castor blocks Steering Block
The steering blocks fit 5x10x4 mm bearings. The caster blocks are very compact and strong units made from a special composite material.

Steering system and Ackermann
The steering system has a reverse swinging pivot system that optimizes the efficiency through all different types of corners

Uprights
Durable composite units. The rear hub uprights use a larger 5x14x4 outer bearing and 10x15x4 mm inner for ultimate lasting performance

Kit includes
* Ready to Race car
* Not included: TX batteries, car battery and charger
* 2.4 GHz transmitter with small receiver
* Waterproof speed controller and 9T 3000Kv brushless motor
* Metal gear servo 7kg
Support
Kundeanmeldelser
Logg inn for å skrive anmeldelse...
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.