Castle CC011-0173-00 - Castle Link V4 USB Programming Kit for Cobra SeriesCastle
Link V4 is our new 32-bit based USB adapter.
NOTE: Compatible with Cobra 8 and Cobra 10 ESCs only and uses the new Castle Link 2 Windows software.
For all other ESCs, please purchase the Castle Link V3 USB adapter.
Program your Cobra 8 ESC on your Windows® PC (10 or higher) with the Castle Link V4 USB programming kit.
- Set up of programmable options with point and click ease
- View your current program settings
- Download and view the ESC's onboard data logs
- Update ESCs with new firmware (if available)
Set-up instructions:
- Download the Castle Link 2 software from our Downloads area.
- Run the Castle Link 2 installer and follow on-screen prompts.
- Plug the Castle Link V4 adapter into the provided Type-C USB cable.
- Connect the ESC's receiver lead to the Castle Link adapters prongs; the brown wire connects to the pin marked "GND" or "-".
Note: Castle Link Classic program is not compatible with the Castle Link V4 adapter and Cobra 8 ESC.
Package includes:
- Castle Link V4 adapter
- Type C USB cable
- Castle Decal sheet
For more information about the Castle Link software, visit the
Downloads page.
Castle Link contains a proprietary interface adapter and standard USB cable with Type-C port. All you need is an available Type-A USB port on your Windows 10 PC.
System Requirements: Castle Link 2 is compatible with Windows 10 or higher.