Varenr: 37418
3 295,-
1 på lager
XR61 er en spennende 3D-modell med vingespenn på 1550mm. Modellen levers i laserkuttet balsa med strukturelle forsterkninger i karbon fiber. ARF utgaven kommer uten motor, esc, servoer, radio og mottaker.

XR52 er bygd med Fiber-fusion teknologi der mye av strukturen er bygd opp av karbon. Dette skaper en sterk, lett og god modell. Materialet til flyene er laser kuttet og CNC maskinert før det settes sammen for hånd i fabrikken til Precision Aerobatics. Vingesettene blir tilpasset individuelt for hver flykropp for å sikre best kvalitet og passform.


Vingespenn: 1550mm
Lengde: 1447mm
Fly vekt inkludert batteri: ca 2028g
Vingeareal: 5206cm²

Anbefalt for å fullføre settet:
* PA Thrust 50 outrunner motor
* PA Quantum 70A Pro ESC
* 2x 3s LiPo 11.1V 2200mAh eller 1x 6s 2200mAh
* 4x Hitec HS-5245MG
* VOX 15x8 eller 16x6 tre propell
* 2.17 Carbon Fiber Spinner

Get ready for a new experience at the flying field: feel connected. If you love our Katana MX, or the XR-52 - you really need to fly this one - the XR-61 takes the best of both. It is the largest plane currently available in the PA line and is the most accurate in the PA range.

The sophisticated aerodynamic design, straight and true factory-build (incidence pre-set) and incredibly powerful set up allowing this plane to perform just like you hope for. Be it precision flying or slow 3D - you got it!

Dont be intimidated by the size or capabilities of this bird - the unique design makes it that it can be flown just like an accurate sport plane - relaxing to fly and easy to land. Switch to high rates and adjust your CG for entirely different flying characteristics.

Being a NEXT Generation PA plane means the XR-61 sustains more energy when flown and by so keeping higher flight speeds which is vital when performing consecutive aerobatics or freestyle maneuvers and allowing sharp and quick turns, resulting in most impressive and breathtaking transitions

You can expect everything: from crazy tumbles, to super slow harriers at walking pace, and high alpha knife edge without any coupling! Elevators that need 0 corrections other than small inputs to keep the plane tracking straight. Super tight and easy to do waterfalls, completely flat - flat spins! Slow rolls the length of the field, super precise snap rolls, completely axial rolls.

This 61" wingspan design is sure to grant you an unmistaken giant-scale feel: being capable of stable, true and straight lines with unlimited power to recover from any situation.

The XR-61 is incredibly lightweight and rigid. Couple its huge control surfaces to its feather-like lightweight and an incredibly low wing loading proves the XR-61 to be a floater that will respond immediately to your stick inputs.

Powered by PA Thrust 50 RotorKool® equipped motor and PA Quantum 70 Pro ESC with a switching BEC makes the XR-61 extremely responsive providing absolute control, extreme performance and predictability, so you are able to get out of the most difficult situations with ease - and this builds confidence. The XR-61 is powered by two standard 2200mAh 11.1V packs, so you don’t need to get a new charger or buy a battery that is dedicated to only one model in your hangar. The two PA 2200mAh allow for 6 minutes of safe intensive 3D flight. This iPAs package has proven to be the most powerful yet most economical and reliable set up possible. Best of all, you don’t even need to know how to select your ESC, motor or battery or even need to learn how to program your ESC. Everything is done for you and all that is required is just to plug and play. With the iPAs package, we have made it as easy as it gets to get it right the first time when it comes to electrics. Not only does the iPAs package make it easy to get it right, it will give you the identical setup (and potential performance) as our Team Pilots.

The XR-61 is pre-assembled by our skilled staff, each specifically trained in building models using our most advanced FiberFusion® construction techniques to date using only the finest grade material, all cut by state-of-the-art laser and CNC machines. In order to attain uniform performance for each and every model manufactured, each plane is consistently crafted on highly sophisticated and accurate jigs. Further, each set of wings are individually matched to their fuselage and all receive matching serial numbers (something most factories don’t do even in giant scales production). We test-assemble each airframe before shipping and ensure precise wing incidence, alignment and fit.

Two wing halves are removable making it easily transportable for a model of this size. The wings are joined together with a CF wing tube and CF sleeve that makes the XR-61 a compact and durable aircraft. All flight surfaces are fully airfoiled, and the ailerons are already pre-hinged with the gaps sealed . For maximum aerodynamics, the aileron design and construction in this model is exceptional, made in such a way that the hinge gap is completely sealed as part of the wing, similar to the full size high performance aerobatic planes. This is indeed quite complex to produce: the ailerons fit into the wing trailing edge tunnels being glued and aligned in the factory. Despite the laborious production of this design we insist on producing the ailerons this way, as it ensures perfect aerodynamic flow over the airfoil resulting in maximum efficiency of the control surfaces. To us, it is the aerodynamic performance that counts most.

Following PA tradition this model too gives the word QUALITY a whole new meaning. From the design through the construction, the hardware, level of finish, and the attention to detail are second to none. Our XR-61 is a TRUE ARF, 99% built for you in our factory. The brief assembly is a joy and most modellers will have it set up in just a few evenings with the help of our video build guide series, PA Builds - now included in the box of the XR-61. "
Logg inn for å skrive anmeldelse...
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.