Phoenix Model SBD Dauntless 1/8

EP/GP ARF

Varenr: 30414
2 795,-
-+
1 på lager
BeskrivelseTilbehørSupportKundeanmeldelser
Beskrivelse

WWII-modell fra Phoenix Model med vingespenn på 144cm som er utstyrt med retracts og flaps. Modellen kan motoriseres med elektro- eller fuelmotor etter pilotens eget ønske, det følger også med tilbehør som tank, motorfeste både for elektro og fuel, linker, henglser osv. Se monteringsbilder samt kundeerfaring under fanen Artikler. 

Modellen har flaps, selv om bildene og videoen viser modellen uten.

 

Introducing
The Douglas SBD Dauntless was a World War II American naval scout plane and dive bomber that was manufactured by Douglas Aircraft from 1940 through 1944. The SBD is best remembered as the bomber that delivered the fatal blows to the Japanese carriers at the Battle of Midway in June 1942
Phoenix Model is proud to present the 90 percent-pre-assembled SBD Dauntless GP/EP ARF . This plane is finely crafted from balsa and plywood and, as a result, has a fantastic fly. With such as high quality material, this is one great flying model. The SBD Dauntless GP/EP ARF comes finished with iron-on covering just as you see it here, and the fiberglass cowl and cockpit are hand-painted to match. Wheels, fuel tank, engine mount, and all hardwares are included. The SBD Dauntless GP/EP ARF is a part of PHOENIX MODELs complete line of Hi- quality aircraft and accessories.


    Technical data
  • Wingspan: 1440mm (56.7in)
  • Length: 1140mm (44.9 in)
  • Flying weight: 3000-3300 g
  • Wing area: 42 dm2
  • Wing loading: 78g/dm2
  • Wing type: Naca airfoils
  • Covering type: Genuine ORACOVER
  • Gear type: Mechanic retract (included)
  • Spinner size: scale type (not included)
  • Radio: 6 channel minimum (not included)
  • Servo: 7standard servo: 2 aileron; 2 flaps; 1 elevator; 1 rudder; 1 throttle; and 1 low profile servo retract (not included)
  • Recommended receiver battery: 4.8-6V NiMH (not included)
  • Servo mount: 21mm x 42 mm
  • Propeller: suit with your engine
  • Engine: .46-.55 / 2-stroke or .52/4-stroke glow engine (not included)
  • Motor: brushless outrunner 1000-1400 W, 480 KV (not included)
  • Gravity CG: 115 mm (4.5 in) Back from the leading edge of the wing, at the fuselage
  • Control throw Ailerons: Low: 8mm up/down, 10% expo; High: 10mm up/down, 10% expo
  • Control throw Elevators: Low: 8mm up/down, 12% expo; High: 10mm up/down, 12% expo
  • Control throw Rudder: Low: 20mm right/left, 15% expo; High: 30mm right/left, 15% expo
  • Experience level: Intermediate
  • Plane type: Scale Military


  • RECOMMENDED MOTOR AND BATTERY SET UP 
  • Motor: RIMFIRE .46-.55 (not included)
  • Lipo cell: 4-6 cells / 4000 ? 5500mAh (not included)
  • Esc: 50-80A (not included)



Feature
Designed for compatibility with both GP and EP flight
Covered in genuine ORACOVER
Removable top-hatch for easy change lipo battery and set up radio
Scale outline is enhanced by the lightweight fiberglass cowl
High-quality hardware package included 

 

Tilbehør
Support
Kundeanmeldelser
Logg inn for å skrive anmeldelse...
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.