Hobbywing EzRun Max6 Brushless ESC

Hobbywing EzRun Max6 er vannbestandig og beregnet for biler opp til 1/6 skala og 8S lipo. Leveres uten kontakter, men 20cm ledninger er med. Motorkontaktene på regulatoren er 6.5mm. Støtter alle Hobbywings programmeringsbokser.



Størrelse 70 x 56 x 47mm
Vekt 240g

OBS!
Dette er en ekstremt kraftig ESC det er derfor viktig å fjern pinion gir ved nyinstallering og gjør kalibrering og programmering før montering av pinion igjen. Det anbefales også alltid å ha hjulene i luften under oppstart.

Specifications

Product Name EzRun MAX6
Product Number 30105000

Type

Scale 1/6th
Brushed/Brushless BL
Sensored/Sensorless SL
Waterproof WP

Specifications

Cont./Peak Current 160A/1050A
Input Voltage 3-8S LiPo/9-24 Cells NiMH
BEC Output Switch Mode:6V/7.4V, 6A

Wires & Connectors

Input Wires Red-10AWG-200mm*1
Black-10AWG-200mm*1
Output Wires Black-10AWG-200mm*3
Input Connectors No
Output Connectors 6.5mm Female Gold Connectors (pre-soldered onto the PCB)

(Note: All the wire length above is the original length not the length you see from the outside.)

Fan

Size 35x35x15mm
Voltage Range 5-7.4V
Powered by Powered by BEC

ESC Programing via

SET Button on ESC Supported
LED Program Box Supported
LCD Program Box Supported
WiFi Module Supported
Program Port FAN/Program Port

Firmware

Firmware Upgrade Supported

Size & Weight

Size 70x46x47mm
Weight 240g

Applications

Motors SL BL Motors/SD BL Motors(only in SL mode)
Vehicles 1/6thTouring Car/Buggy/TrucK
KV Rating/T Count 6S LiPo: KV<1500 / 8S LiPo: KV<1200 / 5892size motors

Installation & Connection

This is an extremely powerful brushless motor system. For your safety and the safety of those around you, we strongly recommend removing the pinion before performing calibration and programming functions with this system, and keeping wheels in the air when you turn on the ESC.