40A Esc for opp til 6S LiPo, regulatoren har innebygget SBec med 3.0A output så regulatoren kan gi strøm til ca 4-5 standardstørrelse servoer med normalt strømbehov. Den leveres med ferdig påloddet EC3-kompatibel kontakt og gullkontakter på motorsiden. Regulatoren kan programmeres via sender eller med programmeringskort som kan kjøpes løst. Dette er V2.0-utgaven.
Spesifikasjoner
Dimensjoner 52x 28x 14mm (L x B x D)
Vekt 32g
LiPo 2-6s, 7.4-22.2V
Brand: Duaysky
Item NO.: 45211
Name: XC4018BA
Description:
XC4018BA,V2 ESC 40A, for airplane and Heli,with plugs.
Standard size, UBEC Xcontroller V2. XC4018BA, ESC 40A
Features:
The new designed 2nd version software and hardware have many new features.
Supports all motor types up to 210,000 rpm(2 Poles motors).
Extremely low resistance, factory high quality MosFETs, for high current usage.
Dualsky Governor Mode(DGM) ready.
Adjustable cut-off, either motor stop or reduction in power.
DLBM on/off - Dualsky Linear Brake Mode. Brake strength can be adjusted by transmitter when switch on.
Full protection features including: Low voltage cut-off, Over heating protection, signal loss auto cut-off.
Normal, Soft or Super-Soft start up modes available, for both fixed wing and helicopter setups.
Smooth and accurate throttle control throughout the range.
Throttle digital signal sampling, compatible with the signal frequency of 14 ms Normal mode and 7 ms high-speed mode (HS Mode).
Throttle range can be re-calibrated, so suitable for all brands of transmitter.Fully PC programmable when used with Dualsky USB link(#45525).
Compatible with programming card(#45200) for easy re-programming at the field!
UBEC switching power supply, support up to 6S Lipo, 3A, support 4-5pcs of standard Digital Servos ( make sure of proper smooth installation )
Specification:
* Dimensions: 52x 28x 14mm(L x W x D)
* Weight: 32g
* Number of Cell: NiXX 6-18, 7.2-21.6V
* LiPo 2-6, 7.4-22.2V
* Resistance(Ri)(Ohm): 0.0031
* Max Cont. Current & Max Cont.Output: 40A, 840W
* Max Burst Current & Max Burst Output: 60A, 1224W
* BEC / Dissipative Power: 5.5V/3A (Swiching)
* Programmable: Throttle + ProgCARD V2
* Input Wires: 120mm, 14AWG, DC3
* Output Wires: 75mm, 16AWG, DB4
* Signal Wire: 300MM JR